Spot welder

Author: Wang Weizhong
Publisher:
Publish Date: 2001-01-01
Features: The book is divided into 14 chapters. The first 7 chapters cover the basic knowledge and operations of various riveting trades. The last 7 chapters combine factory examples to discuss the operations of conventional riveted welded parts, as well as the fabrication and installation of common atmospheric pressure vessels, pressure vessels, and tower-type equipment in chemical plants, on-site maintenance and repair techniques. The book closely ties production practices to explain riveting trade technologies and skills, making it easy to understand and highly practical.
Table of Contents
- Chapter 1: Basic Knowledge of Steel
1. Classification of Steel and Steel Materials
2. Steel Plates
3. Steel Pipes
4. Steel Sections
5. Steel Wires
6. Weight Calculation of Steel Materials
7. Inspection and Acceptance of Steel Materials
8. Storage and Handling of Steel Materials
- Chapter 2: Steel Straightening
1. Principles of Straightening
2. Manual Straightening
3. Mechanical Straightening
4. Flame Straightening
5. High-Frequency Hot Spot Straightening
- Chapter 3: Pattern Layout and Marking
1. Pattern Layout
2. Marking
3. Marking for Curved Steel Section Parts
- Chapter 4: Forming
1. Steel Cutting
2. Preprocessing of Parts
3. Bending Forming
4. Forming by Pressing
- Chapter 5: Manufacturing Processes of Typical Chemical Equipment
1. Characteristics of Chemical Equipment Manufacturing
2. Technical Requirements for Assembly of Chemical Equipment
3. Manufacturing Processes of Several Typical Equipment
- Chapter 6: Quality Inspection of Chemical Equipment
1. Inspection of Raw Materials
2. Non-Destructive Testing
3. Inspection Operations of In-Process Parts and Products
- Chapter 7: Steel Structures
1. Fabrication and Assembly of Steel Structures
2. Analysis of Deformation Causes in Steel Structures
- Chapter 8: Conventional Riveted Welded Parts
1. Conventional Riveted Welded Parts
2. Work Example 1: Hopper
3. Work Example 2: Iron Sand Cleaning Hearth
4. Work Example 3: Skewed Leg Panty Pipe
- Chapter 9: Atmospheric Pressure Vessels
1. Differences Between Atmospheric Pressure Vessels and Pressure Vessels
2. Manufacturing of Atmospheric Pressure Vessels
3. Maintenance and Management of Atmospheric Pressure Vessels
- Chapter 10: On-Site Fabrication and Installation of Large Storage Tanks
1. Fabrication and Installation of Large Storage Tanks
2. Procedures for Fabrication and Installation of Large Storage Tanks
3. Other Work During the Fabrication and Installation Process of Large Storage Tanks
- Chapter 11: On-Site Maintenance and Repair of Pressure Vessels
1. Pressure Vessels
2. Conditions Required for On-Site Maintenance and Repair of Pressure Vessels
3. Methods for Maintenance and Repair of Pressure Vessels
4. Quality Inspection of Pressure Vessel Repairs
5. Process of Pressure Vessel Maintenance and Repair
6. Other Related Coordination Work
- Chapter 12: On-Site Modification and Replacement of Packing in Tower-Type Container Liners
1. Tower-Type Containers
2. Preparations for Tower Equipment Maintenance and Repair
3. Main Processes for Liner Modification and Replacement
4. Other Related Coordination Work
- Chapter 13: Wrapping and Repair of High-Pressure Tower-Type Containers
1. Current Survey of Wrapping and Repair of Tower-Type Containers
2. Formulation of Wrapping Plans
3. Procedures for Wrapping
- Chapter 14: Maintenance and Component Replacement of Large Gas Cylinders
1. Maintenance and Replacement of Internal and External Sliding Tracks of Gas Cylinders
2. Maintenance and Replacement of Cover Plates and Frameworks of Gas Cylinder Domes
3. Partial and Complete Replacement of Dome Side Plates of Gas Cylinders