Concrete Small Hollow Block Building Technical Specification

Author: China Architecture & Building Press
Publisher:
Publish Date: 2004-07-01
Features:
Introduction: The main technical contents of this code include: General Provisions; Terms and Symbols; Calculation Indicators of Materials and Masonry; Static Design; Seismic Design; Construction and Acceptance. This code is applicable to the design and construction of masonry buildings using concrete small hollow blocks as wall materials in non-seismic areas and areas with seismic fortification intensity of 6 to 8 degrees.
Table of Contents:
1. General Provisions
2. Terms and Symbols
2.1 Terms
2.2 Symbols
3. Calculation Indicators of Materials and Masonry
4. Static Design
4.1 Basic Design Provisions
4.2 Load-Carrying Capacity Calculation of Compression Members
4.3 Load-Carrying Capacity Calculation of Local Compression
4.4 Allowable Height-to-Thickness Ratio of Walls and Columns
4.5 General Construction Requirements
4.6 Main Measures to Prevent Cracking in Walls
4.7 Ring Beams, Overhead Beams, and Core Columns
5. Seismic Design
5.1 General Provisions
5.2 Earthquake Actions and Structural Seismic Verification
5.3 Seismic Construction Measures
6. Construction and Acceptance
6.1 Construction Preparation
6.2 Basic Construction Requirements
6.3 Core Columns
6.4 Winter Construction
6.5 Quality Standards for Masonry Engineering
6.6 Acceptance of Masonry Engineering
Appendix A: Axial Force Influence Coefficient φ
Appendix B: Explanation of Terms Used in This Standard
Additional Notes
Provisions for Explanation